Why is my drone tilting to one side

Drones are incredible machines that can fly through the air while taking beautiful pictures and videos. But occasionally, they might not function as planned and begin to lean to one side. This might aggravate you or perhaps harm your drone and its surroundings. Therefore, why does this occur and how can it be resolved?

In this post, we’ll look at some of the most typical causes and solutions for your Drone tilting to one side. We’ll also offer you some advice on how to avoid having this issue arise again.

Quick Summary:

  • Environmental elements like the weather, electromagnetic interference, and the launching surface might induce drone tilting.
  • Drone tilting can also be caused by component variables such propellers, motors, sensors, and controls.
  • The stability of the drone can be impacted by user actions such as flying technique, battery level, and cargo distribution.
  • It’s critical to land securely, pinpoint the source of the issue, and calibrate the drone in accordance with the owner’s instructions in order to correct a tilted drone.
  • Drone tilting can be avoided with routine maintenance, thoughtful flying techniques, and skill improvement.
  • Manual calibration, replacement, or correction may be required for problems with tilted cameras.
  • It is essential to check the drone for tilting before flight to prevent any potential issues or mishaps.
  • In windy conditions, precautions should be taken, such as consulting the weather forecast, selecting an appropriate area, utilizing a powerful and quick drone, flying at a lower altitude, keeping an eye on the battery level, altering settings and modes, and honing flying techniques.

Reasons for Drone Tilting To One Side

The balance and stability of your drone can be impacted by a variety of things. Some of them have to do with the surrounding area, such the weather, electromagnetic interference, or the launching surface. Others are concerned with your drone’s parts, including its motors, sensors, or controller. Additionally, some of them are influenced by your activities, including your flying technique, battery level, or payload.

Drone Tilting To One Side

♻️ DJI Spark Battery Not Charging Troubleshooting and Solutions ♻️

Environmental factors

  • Weather Strong winds have the potential to knock your drone off course and cause it to tilt. Check the weather forecast before taking off to prevent this, and steer clear of flying during storms or severe winds.
  • Electromagnetic interference:are used by your drone to maintain balance and direction in the event of electromagnetic interference. However, electromagnetic fields from power lines, huge structures, or other devices may have an impact on these sensors. Your drone may wander or tilt suddenly as a result of this. Fly away from sources of interference and check the accuracy of your compass before each trip to prevent this.
  • Launching surface Your drone’s stability may be impacted by the surface from where you launch it. Your camera gimbal may not line up with the horizon when you launch your drone from a sloped or uneven surface, giving the impression that your drone is tilted. Always launch your drone from a level, flat surface to prevent this.

Component Factors

  • Propellers: The lift and thrust that your drone produces is produced by its propellers. Your drone may become unbalanced and tip on one side if they are damaged, filthy, or improperly installed. Check your propellers frequently for cracks, chips, or dirt to prevent this by replacing them as necessary. Additionally, confirm that you mount them in the appropriate manner in accordance with your drone’s instructions.
  • Motors:  Your propellers are spun at various velocities and orientations thanks to your motors. However, if they are damaged, worn out, or overheated, your drone may lose power and tilt to one side as a result. To prevent this, regularly inspect your motors for wear or damage and replace them as necessary. Additionally, watch out for overloading your motors with excess weight or attachments.
Component Factors
  • Sensors: The position, orientation, and movement of your drone are all tracked by its sensors. But if they are broken, miscalibrated, or misaligned, your drone may become inaccurate and lean to one side. Follow the instructions in your drone’s manual to routinely calibrate your sensors to prevent this. Additionally, watch out for exposing your sensors to high or low humidity levels.
  • Controller: Your controller is in charge of using radio signals to provide orders to your drone. However, if it is out of calibration, has limited battery life, or is broken, your drone may tilt to one side and receive the wrong commands. Use the drone’s documentation to calibrate your controller on a frequent basis to prevent this. Additionally, be careful to keep your controller charged up and within your drone’s range.

Action Factors

  • Flying style: Your flying technique has the potential to impact your drone’s stability. You run the risk of overstressing your drone and causing it to tilt to one side if you fly it too quickly, too high, or too violently. Fly smoothly and steadily, staying within your drone’s suggested speed and altitude restrictions, to prevent this.
  • Battery level: Your drone’s performance may also be impacted by your battery level. You risk losing power and control of your drone and causing it to lean to one side if your battery is low or dead. Watch your battery level closely to prevent this from happening, and land safely before it runs out.
  • Payload:  Your drone’s payload is any additional weight or equipment you attach to it, such as cameras, lights, or gimbals. Your drone’s balance and aerodynamics may be impacted if your payload is excessively heavy or distributed unevenly, causing it to tip to one side. Use only accessories that are compatible with and authorized for your drone, and make sure they are firmly fastened, to prevent this.
  • How to correct drone tilt
Action Factors

🔰 Phantom 4 Battery Not Charging Causes and Finding Solutions 🔰

How to Fix Drone Tilting To One Side

Do not become alarmed if you notice that your drone is leaning to one side while in flight. You can solve it with a few straightforward steps.

  • Land safely:  The first thing you should do is land your drone. This will stop your drone or the area around it from suffering further harm.
  • Identify the problem:  The following step is to determine the issue’s root cause by examining the previously listed environmental elements, component factors, and action factors. Eliminate any potential sources of interference or damage that might impair the stability of your drone.d functioning properly
  • Calibrate your drone:  The very last thing you ought to perform is calibrate your drone in accordance with the instructions. This will guarantee that all of its sensors and controls are accurate and functioning properly.

How to Prevent Drone Tilting

There are several guidelines you may adhere to if you want to stop your drone from leaning to one side in the future.

How to Prevent Drone Tilting
  • Maintain your drone:  Examine and maintain your drone’s parts on a regular basis. Any worn-out or broken components must be replaced as soon as feasible.
  • Fly smart Before flying, always assess the conditions and surroundings. Avoid flying during storms, severe winds, or while nearby interference sources. Always take off with your drone from a level, flat area. Follow the recommended speed and altitude restrictions for your drone while flying smoothly and consistently.
  • Practice your skills: Develop your flying abilities and knowledge about how to handle your drone in various circumstances. Learn how to use the various modes and alter your settings to suit your needs.

How to fix a Tilted Drone Camera

A slanted camera is one of the most frequent problems that drone users encounter. This indicates that the horizon in your pictures and videos is tilted rather than straight. Your drone footage may lose its aesthetic appeal and quality as a result, and it may also appear amateurish.

Fortunately, there are a few techniques for leveling a drone camera that has been slanted. Here are a few examples:

How to fix a Tilted Drone Camera
  • Adjust the gimbal manually:  Using the controller, you may change the gimbal manually on some drones, such the DJI Mavic Pro. You must choose the gimbal symbol from the settings menu in order to accomplish this. Once the horizon is no longer skewed, press adjust camera gimbal and utilize the left and right arrows.
  • Calibrate the gimbal:  Gimbal calibration is sometimes necessary to make adjustments to its alignment and orientation. You must adhere to the directions in your drone’s manual or app to accomplish this. Typically, to do this, you need to position your drone on a flat, level surface and make various motions using the controller or app.
  • Replace the gimbal:  Your gimbal can be defective or broken and require replacement if none of the aforementioned fixes are successful. To accomplish this, buy a new gimbal for your drone by getting in touch with the company that made it or a reputable repair business.

These techniques will help you correct a tilted drone camera so that your aerial footage has a straight, stunning horizon.

How to Test If Your Drone is Tilting or Not

Check to see whether your drone is tilting before you take it for a spin. This will assist you in preventing any issues or mishaps throughout your travel. Here are some methods to determine whether or not your drone is tilting:

  • Check the propellers:  One of the key elements affecting your drone’s stability and balance is its propellers. Your drone may lean to one side if they are damaged, filthy, or improperly installed. Check the propellers for any chips, cracks, or dirt, and replace them as necessary. Additionally, confirm that they are mounted in accordance with the instructions included with your drone.
  • Check the motors:  The performance and power of your drone are also influenced by the motors. Your drone may lose power and tip to one side if they are damaged, worn out, or overheated. Inspect the motors to look for wear or damage, and replace them if necessary. Additionally, confirm that they are rotating in the appropriate direction as specified in your drone’s documentation.
  • Check the sensors:  Your drone’s sensors have an impact on its orientation and accuracy. Your drone may become inaccurate and lean to one side if certain components are improperly calibrated, misaligned, or defective. Calibrate the sensors in accordance with your drone’s handbook or app to check them. Typically, to do this, you need to position your drone on a flat, level surface and make various motions using the controller or app.
  • Check the controller:  Another element influencing your drone’s commands and signals is the controller. Your drone may receive the wrong orders and tilt to one side if it is out of calibration, running low on energy, or broken. Calibrate the controller in accordance with your drone’s handbook or app to check it. Typically, this entails manipulating the joysticks and buttons in a specific order. Additionally, confirm that it is fully charged and within your drone’s range.
  • Check the weight distribution:  Another element that impacts your drone’s balance and aerodynamics is its weight distribution. Your drone may tip to one side if it is too heavy or distributed unevenly. Place your drone on your fingers to evaluate the weight distribution and see whether it tilts to one side or the other. If it does, arrange your drone’s parts or accessories differently to improve its balance.
How to Test If Your Drone is Tilting or Not

You can check to see whether your drone is tilting by using these methods, and if it is, you may address any problems before taking off.

How to Avoid Tilting Your Drone in Windy Conditions

Windy circumstances can be difficult for drone pilots to handle because they might compromise the drones’ performance and stability. The drone may be pushed off track by wind, tilt in unexpected directions, or even crash. Therefore, it’s crucial to understand how to fly securely and smoothly while avoiding tilting your drone in windy circumstances. 

Here are a few advices:

  • Check the weather forecast:  Check the weather forecast before you fly your drone and steer clear of high winds or storms. The recommended wind speed for flying a drone is under 10 mph, although depending on its size and power, some drones can manage higher wind speeds. In its handbook or specifications, your drone’s maximum wind speed tolerance can be found.
  • Choose a suitable location:  Pick a place that is accessible and free from any obstructions or sources of interference. Flying away from objects that can obstruct the wind or cause turbulence, such as structures, trees, electricity wires, and other drones. Avoid flying over areas like water or sand where a crash could harm your drone.
How to Avoid Tilting Your Drone in Windy Conditions
  • Use a strong and fast drone:  Use a drone that can fly in windy situations and is powerful and quick. Drones that are bigger and heavier are typically more stable and wind-resistant than smaller and lighter ones. In addition, drones with stronger motors and propellers can move faster and generate more thrust to counteract the wind. Drones with capabilities like GPS mode, altitude hold mode, or obstacle avoidance can also be used to help you maintain stability and control in windy situations.
  • Fly at a lower altitude:  a lower altitude flight Fly at a lower altitude where the wind is more steady and blows at a lower speed. Stronger and more erratic winds, which can cause your drone to tilt or drift more readily, are more common at higher altitudes. Flying below 50 meters (165 feet) in windy conditions is a decent rule of thumb.
  • Monitor your battery level: Keep an eye on your battery level and land without incident before it runs out. As your drone must work harder to maintain stability and combat the wind, flying in windy circumstances can cause your battery to discharge more quickly than usual. Make sure you have enough battery to return to your launch location because flying against the wind can affect your flight range and speed.
  • Adjust your settings and modes: According to the wind conditions and your requirements, adjust your settings and modes. To make your drone more receptive to your orders, you may, for instance, enhance the sensitivity of your controller. To alter your drone’s speed and agility, try using different settings like tripod mode or sport mode. To avoid losing control of your drone, do not overdo it.
  • Practice your skills:  Develop your skills and become familiar with diverse drone flying scenarios. You must be ready for windy situations and have the confidence to handle them because they can be unpredictable and difficult. In windy circumstances, learn how to change your throttle, yaw, pitch, and roll to keep your drone level and stable. Learn how to use the return-to-home (RTH) feature as well as how to manually land if necessary.

By using these pointers, you can keep your drone from tilting in windy circumstances and fly smoothly and safely.


In conclusion, a drone’s tilting can be caused by a variety of things, including as the environment, hardware problems, and operator behavior. The drone must be safely landed in order to diagnose the issue’s cause and carry out the appropriate calibrations. Tilting can be avoided with routine maintenance, cautious flying, and skill improvement. Manual correction, calibration, or replacement may be required for issues with slanted cameras. Pre-flight testing should be prioritized, and windy weather measures are crucial. Drone pilots may assure smooth flights, excellent footage, and an improved flying experience by putting these guidelines into practice.


Why does my drone keep going sideways?

Your drone may be flying sideways because there is an imbalance of forces between the 4 sides. Either all the propellers are not producing equal thrusts while hovering or the weight on one side is slightly larger than the other. This can be corrected quite easily using trim settings or by physically removing the cause of imbalance. Some other reasons could be that the propellers are mounted on the wrong motors, propellers are damaged, one or more motors are not producing enough thrust, your drone IMU/compass is not calibrated properly or your remote control sticks are miscalibrated.

How do I fix my drone from flying sideways?

Here are some tips to fix your drone from flying sideways:
1. Verify the wind speed and direction because they can cause your drone to fly erratically.
2. Set the drone’s calibration correctly to prevent sideways flight.
3. Check the propellers to make sure they are intact and firmly fastened.
4. Ensure that your drone’s center of gravity is in the proper place.

Why is my drone not taking off straight?

If your drone is not taking off straight, it could be due to a calibration issue (IMU, compass, remote control), you are in ATTI mode, your thumb is not moving straight on the joystick, the misaligned camera makes it look like it is moving off to an angle, and it could also be magnets in your smart device which are interfering with the electronic components in the remote control.

Can drones tilt?

Yes, drones can tilt. In fact, tilting is an essential part of how drones fly. When a drone tilts in a particular direction, it changes the direction of the lift force generated by the propellers. This causes the drone to move in that direction. For example, if a drone tilts forward, the lift force will push it forward and cause it to move in that direction.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *