DJI Spark Battery Not Charging Troubleshooting and Solutions

A popular micro drone with lots of features and capabilities for aerial photography and cinematography is the DJI Spark. However, it is susceptible to faults and troubles much like any other electronic equipment. The battery not charging properly or at all is one of the most frequent issues that DJI Spark users have.

You are not the only user who is annoyed by this problem, if you are one of them. This issue has received a lot of online reports, and people are looking for fixes. We’ll discuss the causes of your DJI Spark battery not charging in this article, along with solutions.

Quick Summary

• Battery depletion, hibernation mode, obsolete firmware, broken charger, damaged USB cable, physical damage to battery or drone, severe temperatures, and unclean or clogged charging ports are common causes of the DJI Spark battery failing to charge.
• Steps to troubleshoot and resolve the problem:
• By pressing the power button, waiting for a beep sound, and then continuing to press and hold the power button until LED indications briefly light up, the battery can be brought out of hibernation.
• Before charging, make sure the battery is within the acceptable temperature range (5°C to 40°C).
• To ensure correct current and voltage supply, use a DJI charger or USB cable that is genuine and certified.
• By checking the DJI GO 4 app for updates and adhering to the on-screen instructions, you can update the firmware.
• If everything else fails, think about buying a new battery from the DJI official store or other authorized dealers.

🔰 Phantom 4 Battery Not Charging 🔰

Why is Your DJI Spark Battery Not Charging?

Your DJI Spark battery may not be charging or displaying any life for a number of reasons. Among them are:

• The battery is in hibernation mode. DJI smart batteries have this feature to prevent themselves from over-discharging when they are not in use for an extended period of time. When the battery’s voltage falls below a predetermined level, hibernation mode will be activated. The battery won’t respond to any button presses or attempts to charge it while it is in this mode unless a certain technique is used to wake it up.
• The battery is fully depleted. Your battery may have depleted to a point where it is difficult or impossible to charge it again if you have kept it for a lengthy period of time without using it or charging it just occasionally. The battery cells’ lifespan and performance may be impacted by this.
• The battery firmware is outdated. On occasion, the DJI GO 4 app or the most recent firmware for the drone may not work with the battery firmware. The communication between the battery and the drone or app may experience occasional hiccups or mistakes as a result. The battery may not be able to charge properly or display the appropriate status as a result.
• The charger is faulty or not providing enough current. It might not deliver enough current or voltage to charge your battery if you’re using a third-party charger or a USB cable that isn’t designed for your DJI Spark. This may lead to a delayed charge, an insufficient charge, or no charge at all. To achieve the best charging results, you must always use the DJI Spark’s original charger and cord.
• The USB cable is damaged or loose. The ability of your USB cable to transport power and data between the charger and the battery may be hampered if it has any cuts, bends, or breaks. Similar to this, if your USB cable is not firmly inserted into both the charger and the battery, it could result in poor contact and sporadic charging.
• The battery or the drone has physical damage. Your battery’s operation and performance may be impacted if your drone has experienced any accident, water damage, corrosion, or wear and tear. This could lead to the breakdown or malfunction of some internal parts, which would make it impossible for the battery to charge or function properly.
• The temperature is too high or too low. The suggested operating temperature range for the DJI Spark battery is 5°C to 40°C (41°F to 104°F). Outside of this range, the temperature may have an impact on the battery’s capacity to charge or discharge effectively and safely. Extreme temperatures can harm battery cells and shorten their lifespan and capacity.
• The charging port is dirty or blocked. The connection and contact between your battery and the charger may be hampered if there is any dust, dirt, debris, or foreign items in the charging port of your drone. This may result in subpar charging or no charging at all.

How to Fix your DJI Spark Battery Not Charging?

There are various solutions to the DJI Spark battery not charging issue, depending on the root of your issue. Here are a few examples:

Remove the Batteries From Hibernation Mode.

To deactivate hibernation mode for the battery, follow these steps:

• Quickly depress the power button once, then release it.
• When the battery starts to beep, wait for around 10 seconds.
• For around 3 seconds, press and hold the power button until you see all four LED indications momentarily illuminate.
• After depressing the power button, connect the charger.
• Normal battery charging should begin.

♻️ Holy Stone HS720 Troubleshooting Common Issues ♻️

Bring the Battery’s Temperature Back to Normal.

Before charging your battery, you should allow it to reach the proper temperature range if it is either too hot or too cold. It can be left indoors at room temperature for roughly 30 to 60 minutes, or in a shaded or ventilated area. Avoid exposing it to heat sources like fire, sunlight, or other open flames. Never store it in a freezer, fridge, or another cold environment. You can plug in the charger after the battery reaches the ideal temperature to see if it charges properly.

Get a New Charger or USB cable.

Replace your charger or USB cable with a new, genuine DJI product if you think it might be defective or incompatible with your DJI Spark. Ones are available from authorized dealers or the official DJI web store. For support or warranty claims if your charger or cable is faulty or damaged, you can also get in touch with DJI customer service.

Update the Firmware

You should upgrade your battery firmware if it is out of date or incompatible with the DJI GO 4 app or drone software. To achieve this goal, you need to take the following actions:

• At least 50% of your battery should be charged.
• The drone and remote controller should both be turned on after the battery has been inserted.
• Launch the DJI GO 4 app after connecting your mobile device to the remote controller.
• The “Settings” option can be accessed by tapping the “Me” icon in the bottom right corner of the screen.
• To check for updates, tap on “About” and then select “Check for Updates”.
• Tap “Download” and then “Install” to download and install any updated firmware that is available.
• Wait for the upgrade procedure to be finished as you follow the on-screen directions.
• Check to see if the battery functions normally by restarting the drone and the remote control.

Replace the Battery

If none of the aforementioned fixes succeed, your battery might need to be replaced since it is beyond saving. New DJI Spark batteries are available from authorized retailers or the official DJI web store. In the event that your battery is broken or defective, you can also get in touch with DJI customer service for support or warranty claims.

Conclusion

Even though the DJI Spark battery charging problem might be unpleasant and annoying, it can also be resolved with a few straightforward troubleshooting techniques. We trust that this post has given you further insight into the causes of your DJI Spark battery’s non-charging and how to fix them.

Please feel free to ask any questions or share any comments in the space provided below.We would be delighted to hear from you and provide assistance. Please don’t hesitate to reach out with any questions or concerns you may have.

FAQ’s