If you own a DJI drone, you may have come into an annoying circumstance when your controller begins to beep repeatedly. If you are unsure of what is causing it or how to remedy it, this can be quite irritating and perplexing. In this article, we’ll go through a few of the typical causes DJI Controller Beeping and how to fix them.
Table of Contents
- The blog discusses the problem of a beeping DJI controller and offers potential reasons for it as well as remedies.
- Low battery levels in the drone or controller are a frequent reason for beeping, which results in a warning to land the drone.
- Users are encouraged to keep an eye on their batteries, steer clear of lengthy journeys, and bring extra batteries.
- Beeping can also come from joystick misalignment because it causes the controller to read incorrect commands and produce unwanted drone movements.
- Users should make sure the joysticks are at the halfway position and calibrate them using the DJI Fly app to resolve this problem.
- The controller may malfunction or lose contact with the drone due to firmware problems, which will beep.
- It is advised to always use the most recent firmware updates on the controller and the drone.
- When obstructions are detected by the drone’s sensors, the obstacle avoidance feature may start beeping.
- Users should fly in open areas, modify the settings for obstacle avoidance, and, if they so choose, disable the feature.
- The DJI Fly app may be used to correctly connect and sync the controller and drone, which will stop beeping if the controller is out of calibration.
- Users are recommended to contact DJI customer care for extra assistance if none of the suggested fixes work, or to visit the company’s website or forum for more details.
Low Battery Alert DJI Controller Beeping
Low battery levels are among the most frequent causes of your DJI controller beeping. Either the drone or the controller itself may experience this. The controller will continuously beep to alert you that you must land your drone as soon as possible when the drone’s battery level drops to 20% or less12. When the battery level falls below a crucial threshold, the drone may automatically start the Return to Home (RTH) function if you disregard this warning. The controller will beep louder as a result until the drone securely lands.
You should always pay attention to the battery level indicator on your controller screen or on the app on your smartphone to resolve this issue. Additionally, you should refrain from flying your drone for extended periods of time and always carry extra batteries. The DJI Fly app allows you to customize the low battery warning settings to your liking.
A joystick misalignment could also be the source of your DJI controller beeping. This indicates that when you turn on the controller, either one or both joysticks are not in their middle positions. This may lead the drone controller to believe that you are controlling it when, in fact, you are not. This may result in unintended motions or activities and interfere with the drone’s usual operation.
You should always check that both joysticks are in the middle position before turning on the controller to avoid this problem. By following these instructions, you may adjust the joysticks in the DJI Fly app as well:
- In the top right corner of the screen, tap the three dots icon.
- Click Control.
- Select Calibration for Remote Controller.
- To calibrate the joysticks, move them both in a circular motion as directed on the screen.
Your DJI controller may occasionally beep as a result of a firmware problem. This may occur if there is a firmware update process issue, such as a power outage, a network difficulty, or a compatibility problem. This may result in a malfunction or loss of communication between the controller and the drone.
Make sure your drone and controller have the most recent firmware installed at all times to resolve this problem. By following these procedures, you can check and upgrade the firmware via the DJI Fly app:
- In the top right corner of the screen, tap the three dots icon.
- Select About.
- Hit the Check for Updates button.
- To download and install the most recent firmware version, adhere to the instructions displayed on the screen.
You can attempt to revert to an earlier firmware version by following these procedures if the firmware update fails or results in more issues:
- Utilize a USB cable to link your controller to your PC.
- On your PC, open the DJI Assistant 2 application.
- Choose your controller from the available options.
- Select “Firmware Update.”
- To roll back to a previous firmware version, click the arrow icon next to it.
- To complete the firmware rollback, adhere to the instructions displayed on the screen.
Obstacle Avoidance Alert
The obstacle avoidance function of your DJI controller could also be the cause of the beeping. In order to detect and avoid obstacles in front, behind, or below the drone, this feature makes use of sensors aboard the craft. Depending on the settings, the drone will either stop, hover, or fly around an obstruction when it detects one. Additionally, the controller will beep to let you know there is an obstruction close by.
You should always fly your drone in a free and open area, far from any potential impediments, to avoid this problem. Additionally, you want to review and customize the DJI Fly app’s settings for obstacle avoidance. You can alter the sensitivity setting or braking distance, or you can totally disable the obstacle avoidance feature.
A miscalibrated controller is yet another potential cause of your DJI controller beeping. This indicates a loss of signal or connection due to improper alignment of the controller with the drone. This may occur if you use a different controller with your drone or alter the frequency range or channel of your controller.
You should always verify that your controller and your drone are connected and in sync in order to resolve this problem. By following these instructions, you can pair and sync your controller with your drone through the DJI Fly app:
- Activate the controller and your drone.
- On the app’s home screen, select Go Fly.
- Then click Remote Controller Settings.
- Press the Linking Remote Controller button.
- To finish joining and synchronizing, adhere to the on-screen directions.
We trust that this post has given you a better understanding of some of the typical reasons why DJI controllers beep and how to fix them. You might need to get in touch with DJI customer care for more help if none of these solutions work for you or if you’re experiencing other problems with your drone or controller. For additional information and advice, you may also check out their official website or forum.
How do I stop my DJI controller from beeping?
There are several ways to stop your DJI controller from beeping. You can try recalibrating the controller, updating or refreshing the controller firmware, checking for stuck buttons on the RC, recalibrating the compass, calibrating IMU, downgrading the controller’s firmware or factory resetting the controller.
You can also turn off the system warning system in the DJI GO4 app by opening the DJI Go app
> tapping the three lines on the top left
> tapping ‘General Settings’
> scrolling down and locating the ‘System Warning’ option
> toggling it off .
Why is my DJI controller flashing red and beeping?
If your DJI controller is flashing red and beeping, it could mean that the controller battery is low. If it’s blinking red slowly, it means the battery level is low and if it’s blinking red quickly, it means the battery is critically low. You can try recharging the controller battery to a sufficient level to avoid this indication.
Why is my DJI Mavic air controller constantly beeping?
If your DJI Mavic Air controller is constantly beeping, it could mean that either the drone or controller has a low battery or the controller sticks need recalibration. You can try opening DJI GO 4 and recalibrating the RC and refreshing the firmware afterward. There are also other reasons why your controller might be beeping, such as a firmware upgrade failure or if the RC is left idle after powering on